Reply Chris says: September 30, 2013 at 21:16 Hi Ross. It's right here :) You can connect with me too - there's a whole lot of different ways to connect on the left. Reply Rosco says: April 20, 2011 at 23:50 Glenn, if your CD is not booting then it could be a problem with the actual CD itself. Here's the terminal output: [email protected]:~$ sudo grub Probing devices to guess BIOS drives. http://freehomedesignsoftware.net/ntldr-is/ntldr-is-missing-press-ctrl-alt-del-to-restart.html
good reason to post the final result, by the way-- so that future poor souls know it worked. I hooked up the drive right clicked on it and selected format. Reply luster says: June 3, 2011 at 16:27 hi i tried to use hiren cd boot and i scanned bad sector in my harddisk after scanning and fixing bad sector i So far you have done nothing but waste your time.
When you moved Wubi from within Windows (do you have any other Ubuntus as Wubis inside Windows) I figured it might have changed the value contained within the 512 byte segment. I use Notepad to edit boot.ini It is also possible to do the booting with just grub for each OS but will take some more work. Easybcd already uses Bootpart.
If you are satisfied with your decision then press "C". Can you please offer some assistance? you have to be careful with this type of virus because it can transfer to anything that is connected to it (i.e. When the computer starts and you see the Acer splash screen you may have to hit F12 to get to the one time boot option and choose the cd/dvd drive...this will
You misunderstood me if you thought that. Reply Happy says: August 12, 2012 at 14:32 Your solution for NTLDR is missing worked. Reply Spark says: May 31, 2011 at 07:07 Take your Zenith laptop to a Computer repair shop and have its hardware diagnosed properly. http://www.proposedsolution.com/solutions/ntldr-is-missing-press-ctrl-alt-del-to-restart-2/ On Vista/ntfs or on XP/fat32.
His steps will not work if you cannot read the CD on the other machine (as you need to copy files from it to your formatted hard drive). I formatted a second HD and got the same message. i really need my laptop finals are coming up.\015 Answers : \015\012Boot off the Windows Vista DVD \015\012Click Next at the first prompt select the language and click next.\015\012Select the link It then bring me to the window xp recovery console (black screen) with the C:\> thing.
I did have to format a cd to copy the file on to. look at this web-site Join the discussion below! I try 3. If it is under 40 gigs put it in your working machine and format it with fat 32.
Check it out. navigate here It won't work like that. pls let me have it. I can't get to anywhere else … I'm Stuck.
ANYBOdy can answer for this and solve my problem.. once it boots to windows setup, select repair. VIRUS: continue (Y/N)". Check This Out I assumed that this would wipe any previous data.
Really a bit stumped now. Now enter the Windows CD and try to boot into Windows setup. I discarded it because the documentation took hours of my time to figure out.
groot=(hd0,0) # groot=()/ubuntu/disks ## should update-grub create alternative automagic boot options ## e.g. That loads boot files that are out on the disk not in the MBR. Here is how it used to be done before Easybcd. I did not say you needed to download Bootpart to make Easybcd work, its already part of Easybcd.
I can't boot from CD and USB. wont reformat I would agree with everybody here but just want to make sure your doing the right thing in replacing the HDD. the error is ur pc for dard drive so restsrt ur pc.so what is the solution. this contact form drwxr-xr-x 3 root root 4096 2008-12-15 18:24 .. -rwxr-xr-x 1 root root 191 2008-12-15 18:23 default -rwxr-xr-x 1 root root 30 2008-1
The advice above is assuming I will go past this stage. Open a DOS session 3. Close Easybcd. If they're using different cables with no other devices on the cables then set them both as Master or Cable Select.
Anywhere else TAB lists the possible completions of a device/filename. ] grub> find /boot/grub/stage1 find /boot/grub/stage1 (hd0,3) grub> root (hd0,3) root (hd0,3) grub> setup (hd0,3) setup (hd0,3) Checking if "/boot/grub/stage1" exists... In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will To begin insert your Windows XP Professional CD and reboot you computer. But i think that's a moot point...and I never said that I thought I was really intelligent.
I can boot it just fine using the Super Grub Disk...it is only when i try to boot it with the Vista bootloader, that I have problems. :guitar: Cheers! :lolflag: Jam Quit without any action. Then I started an Ubuntu Live CD, and booted from it to the Ubuntu desktop. when you restored your settingd back to default it obvioulsly did not store the fact you had a dard drive installed ... ( I am assuming you where in the bios
So that means your partition number for XP should be (1) and I think you have it as (2) which is the Vista partition number. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. I know my subscribers would enjoy your work. Averatec 3200 Notebook Computer crashed and will not restore.
It is 1997, and Hercules is now the 4th movie in which the main character does have parents. Reply luster says: June 2, 2011 at 20:30 do you a windows 98/95/me then? First of all, Vista is already in the MBR...as i do recall us over going before...and EasyBCD (which is what i've been trying to use for the last few...umm(decades?), has so So resizing and reinstall Easybcd were shorthand for this explanation because I don't intend to type this much in details.
© Copyright 2017 freehomedesignsoftware.net. All rights reserved.